Print page E-mail page

Messages

HP Smart Buy ProLiant DL360 G7 : Intel 2.4GHz Xeon QC

More From: HP

Item #: 12590511

Mfr. Part#: 650253-S01

Availability: On Order

Est. Ship: Call for Availability

Combining concentrated 1U compute power, integrated Lights-Out management, and essential fault tolerance, the DL360 G7 is optimized for space constrained installations.

Intel 2.4GHz Xeon QC E5620 / Upgradable / 1 processor(s) installed / 2 processor(s) supported
4GB installed RAM / Technology is DDR3 SDRAM / 192GB maximum / 12MB installed cache / 0GB Hot-swap hard drive
No Operating System Installed / 1U Rackmount / Supports Gigabit Ethernet Networking

The HP ProLiant DL360 G7 combines performance, intelligent power and cooling management with IT management tools and essential fault tolerance, all optimized for space constrained installations. A 1U server with the improved performance of the latest Intel 5600 series processors, Unique HP Thermal Logic Technologies that provide leadership in energy efficiencies and ProLiant iLO 3 remote management. HP continues to provide more performance, flexibility and efficiency for space constrained environments.

General
Chassis Form Factor	1U Rackmount
Memory
Cache Memory (installed)	12 MB
RAM (installed)	4 GB
RAM (max)	192 GB
RAM Technology	DDR3 SDRAM
Operating System
OS Provided	No Operating System Installed
Optical Drive Information
CD/DVD Type	DVD-RW
Processor
# Processors Installed	1
# Processors Supported	2
Processor Manufacturer	Intel
Processor Model Number	E5620
Processor Speed	2.4 GHz
Processor Type	Xeon QC
Processor Upgradability	Upgradable
Chipset Type	Intel 5520
Data Bus Speed	1066 MHz
Protocols
Networking Protocol	Gigabit Ethernet
Storage
Storage Controller RAID Level	RAID 0
Storage Controller RAID Level	RAID 1
Storage Controller RAID Level	RAID 1+0
Storage Controller RAID Level	RAID 5
Storage Controller RAID Level	RAID 5+0
Storage Controller Type	Smart Array P410i
Floppy Type	No Floppy Drive
Hard Drive Capacity	0 GB
Hard Drive Interface	Serial Attach SCSI (SAS)
Hard Drive Interface	SATA 3.0 Gbps
Hard Drive Type	Hot-swap
Video
External Resolution (max)	1600 x 1200
Video Card	ATI ES1000
Video RAM (installed)	32 MB
Video Slot Type	PCI Express 2.0 x16
Actual Weight	39.50 lb(s)
Compatibility Notes	Processor: (1) Intel Xeon Processor E5620 (2.40GHz/4-core/12MB/80W, DDR3-1066, HT Turbo 1/1/2/2) NOTE: HT indicates that the processor model supports Intel /Hyper-Threading Technology NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2 and 1 cores active.
Contents	1U Rackmount server, software, documentation
Memory Notes	4GB PC3-10600R (DDR3-1333) Registered DIMMs, expandable to 192GB. There are eighteen (18) DIMM slots. One is occupied by a removable 4GB module, the others are available. Some memory notes: For servers with eighteen (18) memory slots: - There are three (3) channels per processor; six (6) channels per server - There are three (3) DIMM slots for each memory channel; eighteen (18) total slots - Memory channel 1 consists of the three (3) DIMMs that are closest to the processor - Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor DIMM slots that are white should be populated first Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs) Do not install DIMMs if the corresponding processor is not installed If only one processor is installed in a 2CPU system, only half of the DIMM slots are available To maximize performance, balance the total memory capacity between all installed processors It is not required, but it is recommended to load the channels similarly if possible You can only have up to eight (8) ranks installed per channel You can only install two quad-rank DIMMs per channel You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be 1, 4; 2, 5; 3;6 on a 3DPC system or 1, 4; 2, 5; on a 2DPC system Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors No mixing DIMM voltage; all DIMMs must be the same voltage Mfr. Part# 500656-B21 - PCC Item# 9661155 - 2GB PC3-10600 DDR3 SDRAM Upgrade Kit Mfr. Part# 500658-B21 - PCC Item# 9678951 - 4GB PC3-10600 DDR3 SDRAM Upgrade Mfr. Part# 593339-B21 - PCC Item# 11264706 - 4GB PC3-10600 DDR3 SDRAM Upgrade Kit Mfr. Part# 500662-B21 - PCC Item# 9793852 - 8GB PC3-10600 240-pin DDR3 SDRAM RDIMM Mfr. Part# 500666-B21 - PCC Item# 10078899 - 16GB PC3-8500 240-pin DDR3 SDRAM RDIMM Video memory: 32MB
O/S Notes	There is no operating system pre-installed. Operating systems supported include: Microsoft Windows Server Microsoft Windows Server Hyper-V Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) Oracle Enterprise Linux (OEL) Oracle Solaris NetWare VMware HP Citrix Essentials for XenServer
Physical Dimensions	1.7"h x 16.8"w x 27.3"d
Ports/Connectors	Expansion slots: (2) PCI-Express Gen 2 expansion slots: (1) full-length, full-height slot; (1) low-profile slot Optional PCI-X Riser expansion slot Expansion bays: (4) SFF SAS/SATA HS bays standard (optional 4SFF HDD upgrade not possible with installed optical) Storage controller: HP Smart Array P410i/512MB FBWC Memory Controller (RAID 0/1/1+0/5/5+0) I/O: (1) Serial (1) Video (4) USB 2.0 (2 rear, 1 front, 1 internal) (4) RJ-45 (1) iLO remote management port (1) SD Slot
Power Notes	Power supply: (2) 460W hot plug power supplies Input Requirements: Rated Input Voltage 100 to 240VAC Rated Input Frequency: 50 to 60Hz Cooling: 3 fans ship standard in 1 processor models 4 fans ship standard in 2 processor models N+1 fan redundancy standard Server Power Cords: All Standard Model servers ship with a high voltage server to PDU power cord. NOTE: ProLiant DL servers do not ship standard with NEMA power cords that allow connection to 110V wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server using a standard wall receptacle (NEMA-15), the NEMA power cord must be ordered separately and the server will be shipped with both cords.
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	3 Years
Warranty - Parts	3 Years