Print page E-mail page

Messages

HP Smart Buy ProLiant DL380 G7 : Intel 2.8GHz Xeon 6C

More From: HP

Item #: 12590520

Mfr. Part#: 643413-S01

Availability: In Stock

Est. Ship: Ships Today

Increased performance and durability for demanding scale-out applications.

Intel 2.8GHz Xeon 6C X5660 / Upgradable / 1 processor(s) installed / 2 processor(s) supported
4GB installed RAM / Technology is DDR3 SDRAM / 384GB maximum / 12MB installed cache / 0GB Hot-swap hard drive
No Operating System Installed / 2U Rackmount / Supports Gigabit Ethernet Networking

The HP ProLiant DL380 G7 Server continues to deliver on its heritage of engineering excellence with increased flexibility and performance, enterprise-class uptime and HP Insight Control manageability, 2 socket Intel Xeon performance, and 2U density for a variety of applications.

General
Chassis Form Factor	2U Rackmount
Memory
Cache Memory (installed)	12 MB
RAM (installed)	4 GB
RAM (max)	384 GB
RAM Technology	DDR3 SDRAM
Operating System
OS Provided	No Operating System Installed
Optical Drive Information
CD/DVD Type	DVD-RW
Processor
# Processors Installed	1
# Processors Supported	2
Processor Manufacturer	Intel
Processor Model Number	X5660
Processor Speed	2.8 GHz
Processor Type	Xeon 6C
Processor Upgradability	Upgradable
Chipset Type	Intel 5520
Data Bus Speed	1333 MHz
Protocols
Networking Protocol	Gigabit Ethernet
Storage
Storage Controller RAID Level	RAID 1+0
Storage Controller RAID Level	RAID 0
Storage Controller RAID Level	RAID 5
Storage Controller RAID Level	RAID 5+0
Storage Controller RAID Level	RAID 1
Storage Controller Type	SAS
Storage Controller Type	SATA
Storage Controller Type	Smart Array P410i
Floppy Type	No Floppy Drive
Hard Drive Capacity	0 GB
Hard Drive Interface	Serial Attach SCSI (SAS)
Hard Drive Interface	SATA
Hard Drive Type	Hot-swap
Video
External Resolution (max)	1600 x 1200
Video Card	ATI ES1000
Video RAM (installed)	64 MB
Video Slot Type	PCI Express 2.0 x16
Actual Weight	60.00 lb(s)
Compatibility Notes	Processor: Intel Xeon Processor X5660 (2.80GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology. NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 6, 5, 4, 3, 2, and 1 cores active.
Contents	System unit, documentation
Memory Notes	4GB PC3-10600R DDR3 1333MHz Registered DIMMs, expandable to 384GB using 32GB PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated at 2 DIMMs per Channel in 12 slots. There are 18 memory slots. One is occupied by a removable 4GB module, the others are available. Some Memory notes: For servers with eighteen (18) memory slots: - There are three (3) channels per processor; six (6) channels per server - There are three (3) DIMM slots for each memory channel; eighteen (18) total slots - Memory channel 1 consists of the three (3) DIMMs that are closest to the processor - Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor DIMM slots that are white should be populated first Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs) Do not install DIMMs if the corresponding processor is not installed If only one processor is installed in a 2CPU system, only half of the DIMM slots are available To maximize performance, balance the total memory capacity between all installed processors It is not required, but it is recommended to load the channels similarly if possible If any Quad rank DIMMs are installed, all channels are limited to only 2 DIMMs per channel. You can only install two quad-rank DIMMs per channel You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be 1, 4; 2, 5; 3;6 on a 3DPC system or 1, 4; 2, 5; on a 2DPC system If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of supporting 1.5V operations Mfr. Part# 500656-B21 - PCC Item# 9661155 - 2GB PC3-10600 DDR3 SDRAM Upgrade Kit Mfr. Part# 500658-B21 - PCC Item# 9678951 - 4GB PC3-10600 DDR3 SDRAM Upgrade Kit Mfr. Part# 593339-B21 - PCC Item# 11264706 - 4GB PC3-10600 DDR3 SDRAM Upgrade Kit Mfr. Part# 604504-B21 - PCC Item# 11265186 - 4GB PC3-10600 DDR3 SDRAM Upgrade Kit Mfr. Part# 500662-B21 - PCC Item# 9793852 - 8GB PC3-10600 240-pin DDR3 SDRAM RDIMM Kit Mfr. Part# 604506-B21 - PCC Item# 11265194 - 8GB PC3-10600 DDR3 SDRAM Upgrade Kit Video memory: 64MB
O/S Notes	There is no operating system pre-installed. Operating systems supported include: Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) Oracle Enterprise Linux (OEL) Solaris VMware Citrix XenServer
Physical Dimensions	3.4"h x 17.5"w x 27.3""d
Ports/Connectors	Expansion slots: The system board has (2) PCI connectors but up to (6) total slots can be achieved with the addition of 2 riser cards. Expansion bays total(free): 8(8) small form factor (SFF) hot-plug drive bays to support Serial-attached SCSI (SAS) and Serial ATA (SATA) drives Optional second drive cage for additional (8) SFF drive bays NOT AVAILABLE with the installed Optical Drive option Storage Controller: HP Smart Array P410i/512MB FBWC Controller (RAID 0/1/1+0/5/5+0) I/O: (1) Serial (1) Mouse (1) Graphics (1) Keyboard (2) VGA (1 front) (4) RJ-45 (1) iLO 2 remote management port (1) SD Slot (5) USB 2.0 (2 front, 2 back, 1 internal)
Power Notes	Power Supply: (2) 460W, Hot plug power supplies Input Voltage Range (Vrms): 100 to 240 Frequency Range (Nominal) (Hz): 50/60 Server Power Cords: High voltage power cord ships standard with all part numbers. NOTE: HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13 power cords (227099-001) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU 6-foot C-14 to C13 power cord (142258-001). Also available: 110 volt 6-Foot NEMA 5-15p to C13 (AF556A PCC item# 7208461). System Fans: Fully redundant hot plug fans ship standard (N+1). One processor models include four fans. Two processor models include six fans.
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	3 Years
Warranty - Parts	3 Years