- 52 PoE Ports
- Remote Management over HTTP, SNMP 1, SNMP 2c, SNMP 3
- Warranty: Limited Lifetime
Advanced Performance for Power-over-Ethernet Networks As small and mid-sized enterprises add Voice-over-IP (VoIP) telephones, wireless access points (APs) and IP-based surveillance cameras to their networks, Power-over-Ethernet (PoE) switches are becoming the mission-critical centerpiece for advanced deployments. The NETGEAR ProSafe 52-port 10/100 Fast Ethernet PoE Smart Switch with 4 Gigabit Uplink Ports is a reliable, affordable and simple solution for supporting 48 IEEE 802.3af PoE devices. Four of the 48 ports support PoE Plus devices for high-power needs such as video phones and 802.11n APs. The ProSafe FS752TP is a smart switch, with intuitive web-based management for quick and easy set up and configuration. Designed to grow with a business, the switch has a powerful feature set including Access Control Lists (ACL), static routing, 802.1x port authentication, enhanced QoS, rate limiting and IGMP snooping. Four dedicated gigabit ports support high-speed uplinks or fiber connectivity. The switch is also energy efficient, with many power-saving features, and is protected by the NETGEAR ProSafe limited lifetime warranty.
With a generous total power budget of 384 Watts, the ProSafe FS752TP connects up 48 devices based on IEEE 802.3af – including up to four high-power IEEE 802.3at devices. PoE optimizes the installation and management of network devices such as VoIP phones, wireless APs and IP-based surveillance cameras by requiring only a standard Cat 5 UTP cable to carry both power and data – reducing installation time and cost. The ProSafe FS752TP also comes with a PoE timer to increase network security and energy efficiency by allowing IT administrators to remotely turn ports off and on.
The ProSafe FS752TP goes beyond basic VLAN and QoS for network traffic management, with Auto Voice VLAN and Auto Video VLAN. These advanced features automatically detect IP phones and cameras on the network, put them in a designated voice or video VLAN, and then assign the proper traffic priorities and security profiles. This plug-and-play approach reduces initial set up time as well as simplifying ongoing monitoring, maintenance and changes. Plus, as a “smart” switch, the ProSafe FS752TP offers IT administrators flexibility in network management. Individual switches can be managed through a simple browser-based graphical user interface. The ProSafe FS752TP can also be managed through SNMP (v1, 2c and 3) for compatibility with existing SNMP-based consoles. For larger deployments, NETGEAR’s Smart Control Center is a free Windows-based application for discovering, configuring and upgrading multiple smart switches across the network.
|
Connectivity
|
|
|
# Ports
|
52
|
|
General
|
|
|
Weight
|
10.800 lb(s)
|
|
Protocols
|
|
|
Networking Protocol
|
PoE
|
|
Remote Management Protocol
|
HTTP
|
|
Remote Management Protocol
|
SNMP 1
|
|
Remote Management Protocol
|
SNMP 2c
|
|
Remote Management Protocol
|
SNMP 3
|
|
Actual Weight
|
10.70 lb(s)
|
|
Compatibility Notes
|
Network Protocol and Standards Compatibility:
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
IEEE 802.3x full-duplex fl ow control
IEEE 802.3af (Power over Ethernet)
IEEE 802.3at (Power over Ethernet Plus) for the first 4 ports
Administrative Switch Management
IEEE 802.1Q static VLAN – (128 groups, static)
IEEE 802.1p Class of Service (CoS)
Port-based QoS
DSCP-based QoS
DiffServ
IEEE802.3ad link aggregation – (manual or LACP)
IEEE 802.1D Spanning Tree – Protocol (STP)
IEEE 802.1w Rapid Spanning – Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning – Tree Protocol (MSTP)
IEEE 802.1ab Link Layer Discovery – Protocol (LLDP)
LLDP-MED
SNMP v1, v2c, v3
RFC 1213 MIB II
RFC 1643 Ethernet interface MIB
RFC 1493 bridge MIB
RMON group 1, 2, 3, 9
RFC 2131 DHCP client
Voice VLAN
Auto-VOIP
DHCP Filtering
Auto denial-of-service (DoS) protection
HTTP and HTTPS
Ping and traceroute
Power saving when link down
IEEE 802.1x
Port-based security by locked – MAC addresses
IP and MAC ACL
Storm control for broadcast, multicast and unknown unicast packets
IGMP snooping v1/v2/v3
Protected Port
PoE Timer
Port-based ingress and egress rate – limiting
SNTP
Port mirroring support (many to one)
Static Routing (support for up to 10 static routes)
Web-based confi guration
Confi guration backup/restore
Password access control
RADIUS Support
TACACS+ support
Syslog
Firmware upgradeable
Cable test
|
|
Contents
|
Switch, rubber footpads, power cord, rack-mount unit, software, documentation
|
|
Physical Dimensions
|
1.7"h x 17.3"w x 12.4"d
|
|
Ports/Connectors
|
(48) RJ-45 10/100 Mbps auto sensing Fast Ethernet ports
(4) RJ-45 10/100/1000 Mbps auto-sensing gigabit Ethernet switching ports
(2) Dual Personality SFP slots
|
|
Power Notes
|
Power Supply
Power consumption: 539W maximum
100-240VAC/50-60-Hz universal input
PoE budget: 384W
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
System Requirements
|
Category 5 UTP Network cables or above
Network card for each PC
Network software (e.g., Windows)
Web browser (e.g., Internet Explorer – 6.0 or higher, Netscape 6.0 or higher)
|
|
Warranty - Labor
|
Limited Lifetime
|
|
Warranty - Parts
|
Limited Lifetime
|
http://www.macconnection.com/IPA/Shop/Product/Detail.htm?sku=13073621#BVSecondaryCustomerRatings