- Provides 1000VA, 640watt(s) power / Surge Suppression is Standard
- Connector(s): Power NEMA 5-15 (F), Power NEMA 5-15 (M) / 6 Outlets
- 10 minute(s) Battery Runtime at Full Load / Attributes include Line interactive
The SmartPro 1000VA 1U Rackmount UPS system offers everything you need to protect rackmount equipment while occupying just 1U of rack space. This UPS provides servers, storage and networking equipment with full-featured power protection, including battery backup, surge suppression and line noise filtering. It features two communication ports (one RS-232 and one USB) to provide shutdown commands and reporting on multiple servers without the need for costly accessories. These ports work with included PowerAlert software to provide IS managers with multiple server support and unparalleled control and management over network power. Users can view and respond to alerts such as system overloads, blackouts, repeated power fluctuations and more.
|
Connectivity
|
|
|
# Ports
|
6
|
|
Communication Interface
|
Serial (RS-232)
|
|
Communication Interface
|
USB
|
|
Connector
|
Power NEMA 5-15 (F)
|
|
Connector
|
Power NEMA 5-15 (M)
|
|
General
|
|
|
Form Factor
|
1U Rackmount
|
|
Attributes
|
Line interactive
|
|
Power
|
|
|
Battery Run Time (max)
|
10 minute(s)
|
|
Power Provided
|
1000 VA
|
|
Power Provided
|
640 watt(s)
|
|
Surge Suppression
|
Standard
|
|
Actual Weight
|
32.00 lb(s)
|
|
Compatibility Notes
|
Voltage regulation: line interactive voltage regulation system corrects input voltages from 83 to 147VAC back to usable 120VAC nominal levels.
Overvoltage correction: input voltages from 128 to 147VAC are reduced by 12%
Brownout correction: input voltages from 83 to 107VAC are boosted by 14%
Front panel LEDs: (5) for Power, Voltage Correction, Battery Charge, Output Load Level, Battery Warning.
Alarms: 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone)
Switches: Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions
AC surge suppression: 480 Joules
AC suppression response time: instantaneous
EMI / RFI AC noise suppression: Yes
|
|
Contents
|
UPS, mounting hardware, cabling for USB & DB9 monitoring and EPO switching, software, documentation
|
|
Physical Dimensions
|
1.75"h x 17.5"w x 16.75"d
|
|
Ports/Connectors
|
(6) NEMA 5-15R outlets
(1) NEMA 5-15P input, 10 ft. cord
(1) USB management communication port
(1) DB9 management communication port
(1) RJ11 EPO (emergency power off) port
(1) accessory slot (available)
|
|
Power Notes
|
Output capacity: 640W/1000VA
Output nominal voltage: 120VAC sine wave output in AC and battery mode
Output voltage regulation (line mode): Sine wave line voltage 120V (-21% +8%)
Output voltage regulation (battery mode): Sine wave output within 5% of 120VAC
Output frequency regulation (line mode): passes line frequency of 60Hz +/-10%
Output voltage regulation (battery mode): inverter output regulated to 60Hz +/-0.5Hz
Recommended electrical service: 120VAC, 15A
Maximum input current: 9.2A
Overload protection: 15A input circuit-breaker
Battery full load runtime: 10 minutes (640W)
Battery half load runtime: 25 minutes (320W)
DC system voltage: 24VDC
Battery recharge rate: 2-4 hours to 90%
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
2 Years
|
|
Warranty - Parts
|
2 Years
|
|
Warranty Details
|
2-year warranty, 3 year with registration. Note: registration is required for 3-year warranty.
Connected Equipment Insurance (U.S., Canada & Puerto Rico) $250, 000 Ultimate Lifetime Insurance
|
http://www.macconnection.com/IPA/Shop/Product/Detail.htm?sku=349917#BVSecondaryCustomerRatings