The HP 600 RPS/EPS has six redundant power supply (RPS) ports supporting backup power to six supported HP ProCurve switches. You can connect up to six HP ProCurve switch units, but backup power can be supplied to only one unit based on port priority. Port 1 has the highest priority and port 6 the lowest. A switch connected to port 1 always receives power before any other port. Likewise, port 2 receives power before ports 3 to 6, port 3 receives power before ports 4 to 6, and so on down to port 6, which only receives power when no other port is receiving power. The unit can provide up to 180W of power at +12 VDC to a single switch.
The HP 600 RPS/EPS also has two external power supply (EPS) ports that provide PoE power for up to two HP PoE switches. You can connect one or two HP PoE capable switches to provide PoE power as a primary or backup source. Power is equally shared between the two EPS ports (204W each); one port supplies maximum power (408W) if the other port is not used.
The HP 600 RPS/EPS is powered on when connected to an active AC power source and it automatically adjusts to any voltage between 100 to 240 VAC at either 50 or 60 Hz. No voltage range settings are required.
|
General
|
|
|
Weight
|
11.500 lb(s)
|
|
Actual Weight
|
11.70 lb(s)
|
|
Compatibility Notes
|
Supported HP Procurve Switches:
HP ProCurve Switch 2824
HP ProCurve Switch 2848
HP ProCurve Switch 2626-PWR
HP ProCurve Switch 2650-PWR
HP ProCurve Switch xl PoE Module
Features:
Supports internal power supply redundancy for up to six devices.
Supports two External PoE devices with up to 370W at 50V for PoE applications.
|
|
Contents
|
Unit, (2) mounting brackets, (8) 8-mm M4 screws, (4) 5/8-inch 12-24 screws, (4) rubber feet, (2) EPS cables, (6) RPS cables, AC power cord, documentation
|
|
Physical Dimensions
|
1.7"h x 17.4"w x 12.8"d
|
|
Ports/Connectors
|
EPS Ports: (2) 7-pin Micro-Fit 3mm
RPS Ports: (6) 7-pin Mini-Fit 4.2mm
Input power connector: IEC-320 C14
|
|
Power Notes
|
Electrical characteristics
Input voltage: 100-240VAC
Maximum current: 9-5A
Frequency range: 50/60Hz
Power:
- With EPS but without RPS: 506W
- With EPS and RPS: 729W
Supports internal power supply redundancy for up to six devices (RPS).
Supports two External PoE devices with up to 408W for one port or 204W for each of two ports at -50VDC.
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
Lifetime
|
|
Warranty - Parts
|
Lifetime
|
http://www.macconnection.com/IPA/Shop/Product/Detail.htm?sku=4953087#BVSecondaryCustomerRatings