- CPU/System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
The A+ Server 2021M-T2R+V features the Super H8DME-2 Extended ATX motherboard, nVidia MCP chipset, and supports up to two dual core AMD Opteron 2000 Series processors, 1000MHz system bus and up to 64GB DDR2 SDRAM. It has a 700W high-efficiency redundant power supply.
|
General
|
|
|
Color
|
Silver
|
|
Chassis Form Factor
|
2U Rackmount
|
|
Motherboard Form Factor
|
Extended ATX
|
|
System Type
|
Server
|
|
Memory
|
|
|
RAM (max)
|
64 GB
|
|
RAM (installed)
|
0 MB
|
|
Cache Memory (installed)
|
0 MB
|
|
RAM Technology
|
DDR2 SDRAM
|
|
Processor
|
|
|
Data Bus Speed
|
1000 MHz
|
|
# Processors Installed
|
0
|
|
# Processors Supported
|
2
|
|
Chipset Type
|
NVIDIA MCP55 Pro
|
|
Compatible Processors
|
Opteron 2xx
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Floppy Type
|
No Floppy Drive
|
|
Hard Drive Interface
|
SATA
|
|
Video
|
|
|
Video Card
|
ATI ES1000
|
|
Actual Weight
|
55.00 lb(s)
|
|
Contents
|
System unit, cables, mounting rails, documentation
|
|
Memory Notes
|
0GB PC2-3200/4300/5300 DDR2 400/533/667MHz buffered, registered ECC SDRAM, expandable to 64GB (400MHz), 32GB (533/667MHz).
There are sixteen (16) available 240-pin DIMM slots. Memory must be installed in pairs.
For single CPU, memory must be populated in CPU1 DIMMS only. For dual CPUs, it is recommended that memory be populatled equally in adjacent memory banks. Dual channel memory bus.
|
|
Physical Dimensions
|
3.5"h x 16.8"w x 25.6"d
|
|
Ports/Connectors
|
Expansion slots: (2) PCI Express, (2) 64-bit/133/100MHz PCI-X, (2) 64-bit/100MHz PCI-X
Expansion bays: (8) 1" SATA hot-swap drive trays supports up to 6 SATA hard drives, (1) DVD-ROM
On-Board Devices:
Chipset: nVidia MCP55 Pro
SATA:
nVidia MCP55 Pro SATA2 3.0Gbps Controller
6 SATA Ports
nVidia RAID 2.0
SATA RAID 0, 1, 0+1, 5, JBOD Support
Network Controllers:
nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
Supports 10BaseT, 100BaseTX, and 1000BaseT, RJ45 output
VGA: ATI ES1000 Graphics Controller
Super I/O: Winbond 83627HF
I/O:
(6) SATA 2
(1) EIDE channel support up to two UDMA IDE devices, supports UDMA Mode 5, supports PIO Mode 4, supports ATA 100/133
(1) Flopppy, 1.44MB support
(6) USB 2.0 (2 rear, 4 internal headers)
(1) VGA
(2) PS/2 (keyboard, mouse)
(1) Fast UART 16550 serial
(1) Serial port header
|
|
Power Notes
|
Power supply: 700W high-efficiency redundant AC w/PFC
AC Voltage: 100 - 240V, 60-50Hz, 10 - 4 Amp
System cooling:
Fans: (3) 80mm 6300rpm fans
Shroud: (1) Air Shroud
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
N/A
|
|
Warranty - Parts
|
N/A
|
http://www.macconnection.com/IPA/Shop/Product/Detail.htm?sku=7179955#BVSecondaryCustomerRatings