MacConnection Clearance Center. Shop Now!
MacConnection Interactive eCatalog


          Tripp Lite PowerVerter APS X 6000W Inverter Charger, Auto-transfer Switch, Line Interactive Voltage Regulation

          More From: Tripp Lite
          Item #: 14595674
          Mfr. Part#: APSX6048VRNET
          Availability: Partial Quantity Available
          Est. Ship: Call for next available delivery

          • Warranty:

          Ordering Information

          Tripp Lite's APSX6048VR DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an inverter. It supplies up to 6000 watts of continuous 208 or 230V sine wave AC power from any 48V battery or automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via a 3 stage, 23/90 amp charging system. In UPS mode, the APS system responds to blackouts and severe voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. A set of high current DC input terminals for simple installation is included (user supplies batteries and cabling - see owner's manual for recommendations).

          It passes sine wave utility or generator power during battery charging and UPS line power operation, and sine wave AC output in inverter and UPS backup modes. Built-in Automatic Voltage Regulation (AVR) corrects line power AC brownouts and overvoltages without using battery power during battery charging and UPS standby modes. It features reliable large transformer design with frequency control that powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. The optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information (part# APSRM4 sold separately). This power inverter supports an unlimited amount of runtime with any number of user-supplied batteries connected. It is highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages. A DB-9 communications port is used for SNMPWEBCARD management.
          Collapse & Return to Top
          Actual Weight 106.00 lb(s)
          Compatibility Notes Key Features

          Supports 208/230VAC output from a 208/230VAC line power source or 48VDC battery source
          6000W continuous sinewave AC output in inverter mode
          Double Boost output supports momentary start-up loads up to 200% of the continuous rating for up to 10 seconds (see specification chart) - OverPower output supports longer duration overloads to 150% for up to 60 seconds
          3-stage, selectable 23/90 amp battery charger with adjustable settings for wet/gel battery types
          Set of (6) front panel LEDs display continuous status information
          Set of (4) dip switches support AC input selection of 230V, selectable 50/60Hz frequency and selectable full or half cycle transfer times
          Set of (4) dip switches support wet/gel battery charging profiles, adjustable 260/270V (230V) high voltage auto transfer during overvoltages and selectable 150/60V - 170/180V (230V) AC low voltage auto transfer during brownouts
          Set of (4) additional dip switches support battery equalization program and battery charger low/high settings
          Automatic overload and thermal (overheating) shutoff
          Front panel remote control connector enables remote off/on switching (APSRM4 sold separately)
          Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
          Automatic Generator Starter jack enables user configuration of automatic generator start-up as inverter batteries drop to 23.0VDC and generator shutoff as inverter batteries are recharged to 28.2VDC.
          Remote battery temperature sensing connection function prolongs battery life by adjusting the charge float voltage level based on battery temperature
          DB-9 communication port for separately available SNMPWEBCARD management.
          Contents Unit, documentation
          Color Black
          Physical Dimensions 10"h x 19.5"w x 9"d
          Ports/Connectors Outlet quantity/type: Hardwired
          Input connection type DC INPUT: Set of DC bolt-down terminals. AC INPUT: Hardwire via built in terminal strip with cover plate
          Power Provided 6000 watt(s)
          Power Notes OUTPUT

          Frequency compatibility: 50/60Hz
          Output: 6,000W
          Continuous output capacity: 6,000W
          Peak output capacity: 12,000W
          Output nominal voltage: 208/230V
          Output voltage regulation: LINE POWER (AC) maintains 208/230V nominal sine wave output from line power source; INVERTER POWER (AC) maintains sine wave output voltage of 208/230 VAC (+/-5%)
          Output frequency regulation: 50/60Hz (+/- 0.3Hz)


          Nominal Input Voltage Supported: 208VAC, 230VAC
          Recommended Electrical Service: DC INPUT requires 48VDC input source capable of delivering 138A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 250A minimum battery system fusing is recommended.
          Maximum input: DC INPUT full continuous load - 145A at 48VDC; AC INPUT 30A at 208/230VAC with full inverter and charger load
          Voltage compatibility: 208VAC, 230VAC
          Voltage compatibility: 48VDC


          Expandable battery runtime: Runtime is expandable with any number of user supplied wet or gel type batteries
          DC system voltage: 48VDC
          Battery Pack Accessory: 98-121V sealed lead acid battery (optional)
          Battery recharge rate: Selectable 23/90 amp


          Voltage regulation: automatic voltage regulation to correct brownouts and over-voltages back to usable levels
          Overvoltage correction: Over-voltages are automatically reduced by 10%
          Brownout correction: Brownouts are automatically boosted by 10% and 20%
          Returns Policy This product is subject to our return policy. Please see our complete return policy for details.
          UNSPSC 39121006
          Warranty - Labor 2 Years
          Warranty - Parts 2 Years
          Collapse & Return to Top

          Our Accessibility Policy

          We endeavor to make our website accessible to any and all users. Please contact us toll-free at 800-998-4388 if you need assistance with navigating our blog, website, or placing an order. We appreciate your business and are happy to answer any questions that you may have.