MacConnection Clearance Center. Shop Now!

MacConnection Interactive eCatalog


          Tripp Lite PowerVerter Inverter Charger 1000W 230V w Pure Sine Wave Output

          More From: Tripp Lite
          Item #: 17587961
          Mfr. Part#: APSX1012SW
          Availability: Temporarily Out-of-Stock
          Est. Ship: Call for next available delivery

          • Warranty:

          Ordering Information

          Provide clean, reliable pure sine wave power for all your alternative energy needs with the Tripp Lite APSX1012SW. This inverter/charger supplies 1000 watts of continuous 230V AC power. Reliable large transformer design and frequency control powers resistive loads like refrigerators, motors, pumps, compressors and laser printers as well as electronic loads like TVs, computers, power tool and battery chargers. The 3-stage charging system will properly charge and maintain your vehicle's battery or separate battery bank. The charge rate is selectable so you can use a variety of battery sizes, as well as multiple batteries to fit your run time requirements.
          Collapse & Return to Top
          Actual Weight 35.50 lb(s)
          Compatibility Notes Key Features

          Pure sine wave output
          Continuous output inverter and high power battery charger
          Quiet, high efficiency operation, high surge capacity and low idle current
          Supply energy to various loads such as resistive load
          Seamless transfer switching
          Load sensing adjustable
          Unlimited back up time with user supplied batteries

          Typical Applications

          Multipurpose inverter/charger with seamless transfer switching - uses include conversion vans, fleet service vehicles, stand alone power source for off grid alternative energy with transfer times of 8-12 milliseconds.


          Alarms: Audible status indicators 10.5V (low battery)/21V start alarm
          Switches: The inverter provides an RJ-45 port for optional APSRMSW remote control. RJ-45 port operates with standard RJ-485 interface (APSRMSW available separately).

          Front panel LEDs: Set of front panel LED's provide inverter status, charger status and battery voltage status.
          Contents Unit, documentation
          Color Beige
          Physical Dimensions 7.25" x 8.75" x 18"
          Ports/Connectors Outlet quantity / type: Hardwire
          Input connection type: DC INPUT Set of 2 DC bolt-down terminals. AC INPUT Hardwire via built in junction box with cover plate
          Power Provided 1000 watt(s)
          Power Notes OUTPUT

          Frequency compatibility: 50Hz
          Output: 1000W
          Continuous output capacity: 1000W
          Peak output capacity: 2000W
          Output nominal voltage: 230V
          Output voltage regulation: Nominal 230v +/- 5% until LBW. Peak Voltage 360v
          Output frequency regulation: 50/60Hz (+/- 0.5Hz)
          Overload protection: Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads


          Nominal Input Voltage Supported: 230VAC
          Recommended Electrical Service: DC INPUT Requires 12VDC input source capable of delivering 240A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
          Maximum input amps / watts: DC INPUT Full continuous load - 240A at 12VDC. AC INPUT 17 amps at 230VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)

          Voltage compatibility: 230VAC
          Voltage compatibility: 12VDC


          Expandable battery runtime: Runtime is expandable with any number of user supplied wet or gel type batteries.
          DC system voltage: 12VDC
          Battery charge: Includes 4/40 amp DC charging system adjustable.
          Returns Policy This product is subject to our return policy. Please see our complete return policy for details.
          UNSPSC 39121006
          Warranty - Labor 2 Years
          Warranty - Parts 2 Years
          Collapse & Return to Top
          Add this product to your cart with selected accessories
          Add To Cart
          Cables (1 Product)
          Add this product to your cart with selected accessories
          Add To Cart
          Collapse & Return to Top
          Description Availability Unit Price  
          View All Warranties
          Collapse & Return to Top

          Our Accessibility Policy

          We endeavor to make our website accessible to any and all users. Please contact us toll-free at 800-998-4388 if you need assistance with navigating our blog, website, or placing an order. We appreciate your business and are happy to answer any questions that you may have.