MacConnection Clearance Center. Shop Now!

Messages

          Tripp Lite SmartPro Modular 3000VA 2880W 120V 2U Rackmount UPS System (1) L5-30R (6) 5-15R Outlets

          More From: Tripp Lite
          Item #: 9517073
          Mfr. Part#: SMART3000RMOD2U
          Availability: Temporarily Out-of-Stock
          Est. Ship: Call for next available delivery

          • Provides 2880watt(s) 3000VA power
          • Surge Suppression is Standard
          • Connector(s): Power NEMA 5-15 (F), Power NEMA L5-30 (F) Power NEMA L5-30 (M)
          • 7 Outlets
          • 4 minute(s) Battery Runtime at Full Load
          • Attributes include Automatic voltage regulation (AVR), Line interactive

          Ordering Information

          Price:
          $1,327.73
           
          Tripp Lite's 3000VA/2880W 120V modular line interactive 2U rack/tower UPS for networks gives you complete network-grade power protection with full support for hot-replacement of separate internal battery and electronics modules. Its high 96% power factor supports loads up to 2880 watts with a high efficiency rating of 95% which reduces electrical operating cost and BTU emissions. 110V, 120V or 127V operation at 50/60Hz is user-selectable. Battery derived sine wave AC output is applied during power failures. Line-interactive dual-boost, single cut automatic voltage regulation (AVR) gives you regulated 110/120/127V nominal output during brownouts and overvoltages.

          A NEMA L5-30P input plug and (7) UPS-supported output receptacles (6 5-15R, 1 L5-30R) are provided. Also featured are two individually controllable load banks for advanced remote-reboot and load-shedding applications, network-grade AC surge and noise suppression and network management interfaces which support simultaneous communications via USB, DB9 serial and card slot for optional SNMPWEBCARD and other card accessories. The HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Detailed monitoring of equipment load levels, self-test data and utility power conditions via all three network interfaces at once is supported.

          Advanced LED indicators provide 5-stage metering of UPS load and battery charge levels, plus single-LED status indicators for utility power, voltage regulation, on-battery, overload, replace battery and site wiring fault conditions. Audible alarms provide notification of on-battery, low-battery and overload conditions. PowerAlert auto-shutdown and management software is provided for complete monitoring, reporting and logging of all site and UPS operational conditions, along with support for advanced configurations involving load-shedding, remote-reboot and redundant dual-UPS applications. The runtime provided by the internal batteries is 11 minutes at half load (1440 watts) and 4 minutes at full load (2880 watts). Runtime is also expandable with the optional BP72V15-2U and BP72V28RT3U external battery packs.
          Collapse & Return to Top
          Actual Weight 87.00 lb(s)
          Compatibility Notes LEDs, Alarms and Switches

          Front panel LEDs: Front panel LEDs support 5-stage metered display of load level and battery charge level, plus single-LED status indicators for utility power, voltage regulation, on-battery, overload, replace battery, site wiring fault and UPS fault conditions
          Alarms: Audible alarm sounds to indicate power failure, low battery and overload conditions
          Switches: (2) front panel switches offer power on/off control, alarm cancel, self test and UPS voltage configuration
          Form factor supported: Supports 4-post rackmount installation with included accessories; optional 2POSTRMKITWM for 2-post and wallmount applications and optional 2-9USTAND accessory for upright tower support available separately.

          Communications

          Network monitoring port: includes USB port (HID enabled), DB9 Serial port (RS232 enabled)
          Software and cabling: includes PowerAlert software, plus USB and DB9 Serial cabling
          SNMP compatibility: built-in card accessory slot supports optional SNMPWEBCARD and RELAYIOCARD network accessories available separately.

          Line/Battery Transfer

          Transfer time from line power to battery mode DC to AC mode: 4msec. typical; AC to DC mode 10msec. typical
          Low voltage transfer to battery power 80V (110V nominal setting), 90V (120V nominal setting), 100V (127V nominal setting)
          High voltage transfer to battery power 135V (110V nominal setting), 146V (120V nominal setting), 151V (127V nominal setting)

          SPECIAL FEATURES
          EPO port: supports "Emergency Power Off" via set of dedicated built-in EPO jacks
          Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure
          Appearance: attractive black steel rackmount housing
          Connectivity
          # Ports 7
          Communication Interface Serial (RS-232), USB
          Connector Power NEMA 5-15 (F), Power NEMA L5-30 (F), Power NEMA L5-30 (M)
          Contents UPS, software, cabling, mounting hardware, documentation
          General
          Attributes Automatic voltage regulation (AVR), Line interactive
          Color Black
          Form Factor 2U Rackmount
          Physical Dimensions 3.5"h x 17.5"w x 24"d
          Ports/Connectors (1) NEMA L5-30R outlet
          (6) NEMA 5-15R outlets
          (1) NEMA L5-30P with 10 ft
          (1) DB9 serial port
          (1) USB port
          (1) EPO port
          (1) Accessory slot (available)
          Power
          Battery Run Time (max) 4 minute(s)
          Power Provided 2880 watt(s), 3000 VA
          Surge Suppression Standard
          Power Notes Output

          Output volt-amp capacity: 3000VA
          Output power capacity: 2880 watts (de-rated to 2400 watts when optional external battery packs are used)
          Output nominal voltage: 110, 120, 127V (selectable)

          Input

          Maximum input current: 24A
          Recommended electrical service: 120VAC, 30A

          Battery

          Full load runtime: 4 minutes (2880W)
          Half load runtime: 11 minutes (1440VA)
          Expandable battery runtime: Runtime is expandable via external battery packs BP72V15-2U (1 max) and BP72V28RT3U (2 maximum, available separately)
          DC system voltage: 72VDC
          Battery recharge rate: 4 hours to 90%
          Replacement Battery Cartridge: RBC96-RMOD2U (hot swappable internal battery cartridge)

          Voltage regulation:

          Overvoltage correction: corrects overvoltages as high as 135V (110V nominal); corrects overvoltages as high as 146V (120V nominal); corrects overvoltages as high as 151V (127V nominal)
          Brownout correction: corrects brownouts as low as 80V (110v nominal); corrects brownouts as low as 90V (120v nominal); corrects brownouts as low as 100V (127V nominal)

          Surge/Noise suppression:

          AC surge suppression: 800 joules
          AC suppression response time: instantaneous
          EMI/RFI AC noise suppression: Yes
          Returns Policy This product is subject to our return policy. Please see our complete return policy for details.
          UNSPSC 39121011
          Warranty - Labor 2 Years
          Warranty - Parts 2 Years
          Warranty Details 2-year warranty, 3 year with registration. Note: registration is required for 3-year warranty.
          Connected Equipment Insurance (U.S., Canada & Puerto Rico) $250,000 Ultimate Lifetime Insurance
          Collapse & Return to Top
          Add this product to your cart with selected accessories
          Add To Cart
          Battery Backup Accessories (1 Product)
          Controller Cards (1 Product)
          Environmental Monitoring (1 Product)
          Other Batteries (2 Products)
          Rack Mount Accessories (1 Product)
          Add this product to your cart with selected accessories
          Add To Cart
          Collapse & Return to Top

          05