- Transition Networks
- Call for next available delivery
- Ethernet 100Base-FX Ethernet 100Base-TX Cabling
- Supports Ethernet, Fast Ethernet Networking
- Data Transfer Speeds up to 100Mbps
Transition Networks's 100BASE-TX to 100BASE-FX Extended Temperature Media Converters make cost-effective integration of twisted pair and fiber optics in industrial environments easier than ever before.
AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration.
Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter, unlike competitive products that ship in Auto-Negotiation mode and may require both hardware and software configuration.
Link Pass Through:
Automatically detects and reports loss of link on a connection. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub.
Far End Fault Detection:
Automatically detects faults in a link. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.
The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link.
Pause is a component of Auto-negotiation and because Auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without our converters. Enabling the Pause feature on the converters betwen two switches allows users to take advantage of this flow control feature on their equipment.
IEEE 802.3 100BASE-FX
Cabling Type: Ethernet 100Base-FX, Ethernet 100Base-TX
Unit, power supply, documentation
Data Transfer Rate: 100 Mbps
1"h x 4.7"w x 3"d
100BaseFX 1300nm SM SC (40 km)
Power is supplied by the chassis
Networking Protocol: Ethernet, Fast Ethernet
This product is subject to our return policy. Please see our complete return policy for details.