Tripp Lite SmartPro 2.2kVA 1920W 100 110 120V Line-interactive Sinewave UPS, 2U Rack Tower, USB Serial, EPO

  • Tripp Lite
  • 13359055
  • SM2200RMXL2UP
  • In Stock
  • Ships in 24 Hours
Ordering Information
$979.00
  • Provides 2200VA, 1920watt(s) power
  • Surge Suppression is Standard
  • Connector(s): Power NEMA 5-15 (F), Power NEMA 5-20 (F)
  • 8 Outlets
  • 5 minute(s) Battery Runtime at Full Load
  • Attributes include Line interactive
Tripp Lite's SmartPro SMART2200RMXL2UP 2U Rackmount Uninterruptible Power Supply (UPS) provides network-grade line interactive voltage regulation, surge suppression and long lasting, expandable battery support for critical network hardware during blackouts, brownouts and extended power failures. A high 0.87 power-factor configuration with its 1920 watt output capacity makes this UPS ideal for a variety of networking, industrial and other high performance applications. The 96% line power mode efficiency saves operating costs and BTU heat output. Runtime is expandable with the optional BP48V60RT3U and BP48V24-2U external battery packs. This UPS maintains battery-derived sine wave AC output during power failures and extreme voltage variations. Line-interactive automatic voltage regulation (AVR) provides two levels of voltage boost during brownouts and one level of voltage cut during overvoltage conditions to maintain regulated 100/110/120V nominal output over an input range of 83 to 145V.

Network management interfaces support simultaneous communications via USB, DB-9 serial and a slot for an optional SNMP/Web management accessory card. The optional SNMPWEBCARD gives you remote management and control of the UPS via the built-in network interface. An optional ENVIROSENSE accessory works with the SNMPWEBCARD to report temperature, humidity and status of up to (4) optional SRWITCH door access sensors or other user supplied contact closure sensors. The HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X. Detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once is supported, and PowerAlert monitoring software with USB and serial cables is included.

Other features include: Emergency Power Off (EPO) interface; integrated 2-bank programmable PDU switching which supports load shedding and remote-reboot of up to 2 individual connected devices; 3-stage metered current monitoring and battery charge status LEDs; utility power and voltage regulation LEDs; audible alarm; self-test; supported 2U rackmount installation with a maximum depth of 19 inches. 4-post rackmount accessories are included. 2-9USTAND tower stands and 2POSTRMKITWM two post rackmount or wallmount installation kits are available.